Read on if you want to find out the real difference between Zero Water vs Brita filter. The Brita and ZeroWater are two of the most popular water filter pitchers on the market. While they are both fantastic at removing harmful substances from the water that you drink, both can tackle the job in slightly different ways. Let’s take a look.
Water Filter Quality
Both the Brita and ZeroWater are NSF International certified. This means that they both remove lead and other harmful substances from water. This is fantastic. However, the ZeroWater accomplishes this in a slightly different way.
The ZeroWater has a 5-stage filter in place. The Brita has a single 2 stage filter. We are not going to get too technical here, but due to the way in which the ZeroWater filter works, it is able to remove all solids from the water. The Brita can’t do this. Granted, it is unlikely that there are going to be ‘solids’ in your water anyway and the Brita should be able to remove just about everything you will find in your drinking water, so this should not be that much of an issue.
Speed of Water Filter
As the Brita has only a two-stage process to put the water through, the filtering should be far quicker. On average, you should be able to filter a cup of water per 40 seconds with the Brita. The Zero Water takes closer to 2 minutes. This means that if you want to filter the full 10 cups that the Zero Water holds, it will take 20 minutes. For the Brita, it should take under 10.
For the most part, both the Zero Water and the Brita are very ergonomic jugs. The ones that we are talking about here should hold 10 cups. They are jugs. This means that they should be easy to hold. You just opt for whichever one boasts the best aesthetics for you. However, it is worth noting that the Zero Water has a nozzle on the back of it. This will allow you to pour water into a glass without holding the jug up. This nozzle should fit any bottle or cup. The only way to pour the Brita is by picking it up.
One of the ‘key highlights’ of the Zero Water filter jug is that it provides you with a digital readout on the health of your water filter. This means that you will know when it needs to be replaced. The Brita does not offer a feature like this. The Brita uses a ‘sticker’ feature instead. This means that there is a small sticker inside the filter which informs you when the filter needs to be replaced. This does help to keep down the overall price of the jug. In the grand scheme of things, there is little difference between the two in terms of the readout. Some people will prefer the digital readout, others will prefer to save money with the sticker readout. Both filters should last for 40 gallons of water before they need to be replaced.
Still not sure? Read our complete guide about water filter pitchers here!