October 2020


An industrial floor is a seamless concrete floor, it has many features that make it more suitable than a normal floor in many locations, indoor and outdoor, most commonly used in places such as a warehouse where a lot of heavy machinery is used. Traditional industrial floors have important features such as they are more durable, meaning they’ll be more resistant to scratches, dents, and just general damage that can be caused from day to day operations. They are usually flat, impermeable, and have great thermal insulation to help prevent the structure from being damaged. Machinery is heavy so industrial floors absolutely have to be able to withstand compression, the concrete is usually reinforced with mesh to give it a strong tensile strength as well as compressive strength. One of the most important features of an industrial floor is vital in keeping any workers safe during their shifts, as the floor is concrete and there is usually heavy machinery around if a staff member were to fall it could be dangerous. Therefore, industrial floors must be non-slip floors to protect workers and prevent any major accidents.

Why Use Industrial Floor Cleaners?

It’s so important that you know how to properly clean hardwood floors to keep them in top condition for as long as possible. Industrial floors usually cover a very large surface area so it can be a time-consuming task to ensure they’re cleaned thoroughly. When it comes to industrial floors your standard mop and floor cleaner might not be the best choice. Luckily though with industrial floors comes industrial floor cleaners.


The first industrial floor cleaner is the most useful – the vacuum. Industrial vacuums are considerably bigger than a household vacuum and have a much greater capacity meaning you won’t have to keep emptying it, they also can hoover up both wet and dry things leaving your floors already looking much cleaner.


The industrial sweeper is another great cleaner, it’s easy to control and very safe, it simply uses rotating brushes to sweep dirt from the floor into a container that can be easily disposed of when you’ve swept the whole floor.

Scrubber Driers

It is equally as important to remove any underlying dirt as well as surface-level dirt as any underlying dirt that’s left can compromise the integrity of the floor structure. Scrubber driers are used to remove the underlying dirt, they mirror the action of using a small scrubber, but on a much larger scale. It uses a special type of detergent and a great feature of the machine is that the way it works stops the floor from getting too wet as that can be a health & safety hazard. They are much more powerful and efficient than if you were to use your equipment from home, using any other basic equipment is not recommended.

Should You Invest?

If you have an industrial floor then investing in floor cleaners is a necessity, no doubt about it. It would be a ridiculously difficult task to clean your floor without them. The price of industrial floor cleaners ranges anywhere from $600 to $20,000. We would recommend buying a mid-range one as if you were to buy the cheapest the likelihood is it won’t last as long or be as good so you’ll either spend more on replacing it or on maintenance costs over the years. We also don’t recommend spending $20,000 on floor cleaners as there are some great ones available at much lower prices. Another option if you don’t have the cash available yet is to hire equipment to use whilst you save to invest in your own.

Most of us live our lives without thinking about where our stuff goes when we rinse something down the sink or flush the toilet, but there are some people who work to keep these systems running smoothly for all of us. There is a lot of maintenance that goes into these systems, and I will explain why septic tank pumping in braselton or other places near bodies of water is a very much needed service.


Septic Tanks

A septic tank is something that helps to breakdown the solid matters in sewage and filters the water. They are the most vital part of the process, being the first part that the sewage enters before being moved to the next parts for extra filtration, and any issues with this cause issues further through the process as well. Due to the sheer amount of sewage that flows through this tank, to properly maintain the tank it needs regular servicing (usually every 2-3 years). The way to clean it out is to pump the tank, to remove the build-up of sludge and debris. This helps to keep the system running smoothly and to prevent too much bacteria from being in the system, but some sludge needs to be left in the tank to keep the right balance of bacteria. It’s a very delicate system. These systems are very common especially across America near water bodies which help in putting the water back into waterways.


Treatment Plant

A treatment plant is the next step in the filtration process for sewage, although not every system has this. These typically use air to help further break down and treat waste, creating cleaner and safer liquid before it moves onto the dispersal area. This will also need regular maintenance, and desludging every so often helps to prevent solids from continuing through the system which can cause blockages. However, cleaning out your septic tank regularly, it will help to keep this part functioning properly too.


Dispersal Area

This is the final part of the sewage system. This consists of a series of pipes and chambers which diverts the water for its final treatment. If the sewage is coming from a septic tank, then the dispersal area will direct it to soakaways due to the bacteria remaining in it. If it is coming from a treatment plant, then the water can be fed directly into local streams or ditches. But any blockages within this system can cause a pipe to burst and leak, which could be damaging to the environment. If this does happen, a professional would be called in to look at that matter and repair the system.


There are of course ways in which we can help with this system in our own households. That includes not flushing things down the toilets that shouldn’t be flushed (such as baby wipes and cotton buds) and using a drain catcher to stop large chunks of food from going down the plug.

The Industrial Revolution saw our world move into an age of development. And as our technology advanced so did our methods of shipping. And it is, without a doubt, thanks to our efficiency at shipping goods and materials that our world has boomed into the capitalist wonderland it is.

But we are now faced with an issue of massive proportions. 2021 could see a massive slowdown in industrial shipping across the globe. But what does this mean? And how does it affect the general public?


The Consequences

A shipping slowdown would be exactly what it sounds like. All industrial shipping would take longer to arrive at its destination than before. And this has a knock-on effect as every freighter that is a late will, in turn, make more freighters late.

This slowdown isn’t concerned with your amazon delivers, but rather industrial products such as building equipment and materials. Mass components for electronic factories. New products being shipped in from the warehouse. Everything that isn’t on a store shelf or in an amazon warehouse will suddenly be in short supply.

This means hundreds of companies will suffer. Construction firms will be unable to work and prices for materials will rise significantly. It will become more difficult to find pest control in Rocklin or anywhere due to a lack of chemicals.

And, of course, the biggest issue. Food. A lot of first-world nations no longer produce a lot of food within their own territory. Not enough to feed a nation. So they import a lot of it. Suddenly, store shelves will be bare and empty. Luxury products will vanish. You will have to pre-order food just to secure it.

The Pandemic

The biggest reason for this potential slowdown is, of course, the global pandemic. No one could have seen it coming. No one could have imagined the devastating effect it would have on the economy and the world at large. And we will still be feeling the sting of the pandemic.

The effect of lockdown is, in many counties, imposing a lot of quarantine restrictions on goods being brought into countries. A lot of products have to be locked away for two weeks first to make sure they are safe.

A lot of the import channels are also being reserved to bring in medical equipment and PPE. Which is good considering how vital the fight against the virus is. But the knock-on effect is slowed down shipping.


Another massive factor that is contributing is the famous Brexit. For those that don’t know, Brexit was a vote held by the United Kingdom in which they decided to leave the European Union. While they are still sorting out the finer details, it seems it is headed towards a disaster that will have lasting consequences.

Many people are worried that Brexit is going to cause a lot more restrictions for imports in and out of the UK. And, with it being one of the world’s leading superpowers, this is going to have a knock-on effect for everywhere else. This would be fine on its own if it wasn’t for the lockdown effect also piling on top.

Will it Happen?

We have to keep in mind a slowdown of this scale isn’t certain. There are so many things that can bed done to avoid it. Ships can be converted into cargo vessels. Roads can be cleared to ensure quick transport. Governments can reduce taxes on shipping firms and allow them to employ more staff.

We are living in uncertain times. All we can do is believe in each other and keep socially distancing to avoid spreading the virus.