As a kid, we all dreamed of winning a golden ticket. A Candy Factory was as much as a fantasy landscape as Middle Earth. And with movies like Charlie and the Chocolate Factory tantalizing us even more, many people have often found themselves wanting a look inside these factories. To see where the world’s most delicious sweet treats are produced.

The actuality of these factories isn’t quite as whimsical as the movies would have you believe, but they are every bit as fascinating and stupendous. Housed within the factories are magnificent machines that use science and engineering to create incredible candies daily.

But how do these machines work? And what machines are actually used? Come with us as we take a look at what goes on inside a modern Candy Factory.


The Chocolate Machine

We spoke to some experts over at foodplusice to better understand how exactly a chocolate machine works. Before the coca beans ever make it to the factory they undergo a process of fermentation followed by a heavy session of drying in the sun. After this has been done they are inspected and then shipped to the factory.

The machines used to create chocolate bars do a few different things. Firstly they will roast the beans. A large oven-like compartment will reach temperatures of up to 100 Degrees or higher. Once roasted the beans are moved onto the cracking section. The machinery will crack open all the shells and then use an industrial fan to gently separate the shells from the actual chocolate part.

Then the chocolate, known as the nibs, is poured into a massive vat. Here the grinding process takes place turning it into a chocolate paste. They then add the cocoa butter and mix it all together in an industrial mixing vat. It is at this point the mixture is poured into the molds to set into the familiar bar shape.



The process behind taffy is a lot simpler than chocolate. There are really only two major stages of the process.

The first is mixing. Taffy is made up of a combination of different chemicals and additives. It isn’t as natural as chocolate. So, a strong industrial mixed is needed to combine the ingredients. Taffy is very sticky so the machine also has to keep it hot and be strong enough to churn the substance.

Next comes the stretching. Previously this process was done by hand. You’ll most likely have seen a video of someone stretch the dough-like taffy around their arm over and over again. This is the general idea of the Taffy Stretching Machines simulate. Using powerful rotors, they stretch and thin the taffy down into more manageable sizes.

After this, the taffy is moved onto a cutting conveyer belt. Here they use powerful industrial cutting machines to slice the taffy up into its desired shapes and sizes.



Marshmallows follow a similar creation pattern to Taffy but require a different machine to create their unique shape.

The mixing process is similar, although the marshmallow mixture is a lot lighter and fluffier than that of Taffy, so the mixing machine doesn’t have to work as vigorously.

After this, the mixture is fed through a special piping machine. The machine manages to dole exactly the right amount of mixture through specialized pipes. This creates a long tube of marshmallows. Then this tube is put under a cutter and finely cut into the specific shape, all the while being slightly heated to allow it to keep its fluffy texture right up until it is sealed for freshness.


Denmans is an extremely well-known name within the industrial wholesale industry, offering a wide range of construction tools and materials for very reasonable prices and at the very best quality. If you are someone who is interested in bulk buying building materials then Denmans would have to be the place to visit, with helpful and knowledgeable staff Denmans is known for offering brilliant advice in terms of what would be the best for your project. Denmans is also great at offering contracts to construction businesses, allowing a genuine relationship to be formed between business and client and allowing companies to have everything they need at any given time. The convenience of having every building material you could possibly need all under one roof makes Denmans the perfect choice for any construction task you could be contracted to do.


Another common name in the industrial wholesale world, Rexels has provided high-quality materials for over twenty years, their helpful staff is on hand for any of your construction inquiries and they have even been known to offer input on your construction jobs. Much like Denmans, those who work at Rexel are experts within the industry so you know you can trust any advice they give. Rexel is well renowned for stocking the very best power tools and the latest models as they become available on the market, in particular when it comes to welding equipment, the very best can be found at Rexel. As they stock some of the latest welding equipment I would highly recommend paying them a visit to find out some of the latest methods and advice on what would be best to use for the job you have been given, and interesting tips and tricks such as using welding wires to connect metal together (more details here) you can be sure you’re going to have the best experience.


Bestway is a pretty recent addition to the world of industrial wholesale, but in the short time they have been open they have built themselves a pretty good reputation. Bestway works with the very latest developments in construction to ensure they have the latest technology and materials available to their customers. By offering the latest developments for reasonable prices they have built their brand and are set to be one of the best industrial wholesalers available in 2021. Unlike their competitors who may not stock the most recent developments, Bestway works closely with some of the most high profile material development companies in order to ensure they have the latest technology available. The fact that they put so much focus on offering new products really sets them apart from their competitors and has guaranteed them a significant amount of custom.


Aston and Fincher

A final industrial wholesaler you should consider using if you are in the market for building materials or tools would have to be Aston and Fincher. Starting out as a small family run business they have built their way up to become a well-known name in the industry, they stock anything a construction worker could need and in the unlikely event they don’t have the product for you they are prepared to quickly source it for you. Although the business has undergone significant growth in the last few years, the family-run attitude towards their customer service has not changed, with professional, friendly staff I’m sure a visit to one of their stores is going to be a positive one, with high-quality materials readily available for all of your construction needs.


This past year has been a tumultuous one. Life as we knew it was turned on its head and things will likely never go back to normal again. And the commercial market is no exception to this huge paradigm shift.

Physical shopping is now riddled with new restrictions in terms of what we must wear while in the store and how we move about the aisles. And that’s great. Anything that keeps customers and staff safer during this troubling time is a huge plus in our books.

But it does mean a lot of businesses are struggling to stay afloat, particularly those without an online presence. But it seems some areas of the commercial market are actually on a steady increase. And it might surprise you.

We spoke to a few market experts and consumers to find out if the Power tool industry is set for a massive market boom in 2021.


Lockdown Construction

The power tool industry has always been fairly stable. As a business or casual user makes use of their power tools, they will encounter a certain amount of natural wear and tear. This means most power tool products will need to be repaired or replaced eventually, meaning the market always has demand.

In recent years, due to technology improving and becoming more resilient, the market numbers for this industry have dropped a bit. Nothing major but there is a definite decline.

Then the pandemic happened. A horrible, heartbreaking experience. People were forced to stay inside for months on end. And when it started the market saw a sudden sharp uptake in purchase numbers of power tools.

Our market expert attributes this to the sudden increase of people taking up DIY projects that they have been putting off, or families looking to work together and create something new in their garden. When people suddenly find themselves with time on their hands, it is amazing what products get boosted.

The sites that seemed to flourish were ones aimed at home users and individuals, rather than wholesalers or cooperate supply chains. It is this key bit of data that allows us to understand why this increase is taking place.


Website Analytics

Continuing our research, we asked some data analyzers to dig into the online stats in relation to power tool information and guides. They found the number of people looking online for how-to guides for power tools increased almost ten-fold within a month. A startling increase.

One of the more popular guides that were accessed was an impact driver guide. This information is important as it allows us to see what type of DIY work customers are partaking in. With that information to hand, our experts can safely predict what products are going to see a boost in sales in the coming month.

How? Any hardware store or DIY expert worth their salt will know exactly what tools, products, paints, and other materials will be used for any type of project. Even personalized art projects. So with that information to hand, we can carefully graph out the next few months of DIY sales.



Our research has to lead us to one conclusion. If the world continues in this upward trend of DIY and home improvement, the Power tool industry is set to boom in 2021. Most small scale retailers and home improvement stores will see a sharp increase in customers and sales.

But is this all good? We have to examine the other side of the argument as well. As one market booms, another will shrivel. And that is the industry of professional handymen and construction firms.

Normally relying on the fact that most home-owners won’t get their home renovations done themself, these professionals are going to take a serious hit as more people become self-sufficient.  And in an economic climate crippled by the pandemic, is this what we want?

Our advice is this. Get your hands stuck in with some fun DIY projects. Build a new shelf. Create something with the family. But if you do have a large renovation project that needs doing. Support the local economy and hire a professional. If we all do our part, we can build a better tomorrow


If you’re running your trade business and you’re now beginning to find that you’re often struggling to keep up with demand. If you’re feeling like you have to be in 8 places at once or you’re even at the point where you’re having to turn down jobs, you may be at a stage where you need to expand your business to keep up with demand. When you’re planning on expanding your business as a tradesman, the key to successful expansion is to get yourself into a position where you can hire more workers. Once you’ve interviewed and trained your potential employees, it may be time to look into maintaining vehicles that your employees can not only use to get to jobs but that you can also get personalized to have your company logo plastered along the side. Now your company is not only able to get to more jobs at once but now you can get free advertising for your company as you travel to do a job. So, if you’re thinking this may be the next step for you, but you’re not sure as to how you would keep the vehicles running, keep reading to see how you can successfully maintain a fleet of work vehicles.


How to Keep Things Cost-Effective

When you’re first looking to arrange a fleet of work vehicles, it may be worth checking to see if any of your employees have access to a van. That will save you having to buy a new van and means the only cost will be the personalization and company insurance. If you’re having to invest in a couple of company vans, it may be worth looking online to see if you can get some good quality second-hand vans. If you’re wanting to look at some used vans, there are plenty of places online for you to search. It could end up saving you a lot of money and means you’ll have extra money for the maintenance of the vehicles. Just be sure to do your research and take test drives before buying anything.


How to Maintain the Vehicles

Once you have your small army of company approved vehicles, the next step is making sure that they’re all properly serviced; you don’t want any of your vehicles breaking down on the way to a job. You can book each of the vehicles in for an annual service to make sure everything is working in order. It may be worth asking your employees to do their best to keep the vehicles looking clean and tidy, it’ll set a better precedent for your company. One of the most important things is getting your company logo on the side of your vehicle. Many companies have been investing in personalizing the side of their vehicles, one company killing the vehicle branding game in New Jersey is A quick look at their site you’ll see how they use their vehicles as another tool to help broadcast their business. It is a small investment that will pay off big time in the future. Just be sure to mention your contact details as well.


One of the most important things you can do to help ensure your work vehicles are kept in their best shape is to communicate with your employees. You can arrange monthly inspections to make sure each van is being kept in good condition and you can even trial swapping vehicles between workers to make sure everyone finds a vehicle they’re happy with. If you’re happy with the worth ethic of your employees and they’re keeping the vans in top shape, make sure to reward them. Happy employees make a happy business.

Sustainable energy is something which can be naturally replenished technology which helps with the energy efficiency with the long term availability. Sustainable energy is one which needs to understand and meet the growing demand of energy today, which will allow you to have the right demand of the people. There are many renewable energy sources which include solar, wind, geothermal, hydropower and other forms of sustainable energy. The energy of the world needs to grow, which will work with the maturity of our technology. These changes have given rise to many alternative sources of harnessing energy, but there is still a long way to go.

Fossil fuels have served mankind for several years and have made our lives simple. The big question that stands is that fossil fuel can be considered to be vanishing soon. It is one of the serious environmental problems from global warming and climate change which can cause a lot of consequences. Huge investments were made by many different countries for the development of wind farms, solar farms, dams which work around the rivers and tidal power stations. These are a few ways you will have to depend on fossil fuel, which can be reduced to have some extent, reduced dependence. Many times people do tend to ignore leaning towards fossil fuels. The fossil fuel can meet the need for energy. But it is important that people who depend on you will have irreversible consequences.

There are many renewable energy projects which require huge capital and can produce small amounts of the world’s energy consumption. There are many steps taken to have positive steps to help with renewable energy. This looks impossible as it can cost a lot of raw materials, machinery and can result in the cost of fossil fuels increased. Fossil fuel is a non-renewable energy source which can help generate with huge power plants.


The components and raw materials used in these projects are designed to be manufactured in such a way that the fossil fuel factories have the right finished products to help with the transportation with the help of road and rail networks. The large workforce will allow people to use vehicles to help travellers with the workplace. There are trucks loaded with big machines which include the earthmover and turbines, complex machines, generators, transformers, power cables and blades.

These plants are located in remote areas which include the likes of personal choppers. This is the point where fossil fuels directly which can help with several indirect ways to ensure that enormous amounts of renewable projects are set into working conditions. There are many solar power plant, hydropower plant and wind farm which can be installed in low amounts of fossil fuel which is required to help perform maintenance, repairs, adjustments and can be reset with other parts.

If your sump pump is running continuously and won’t turn off, this is a major indication that there is an issue somewhere in the system. Thankfully, most of these problems should be simple to rectify. Usually, you will not need to replace your whole system. Learn why your sump pump may be constantly running.

Jammed Sump Pump Float Switches

This is probably one of the most common reasons as to why sump pumps fail. There will be a float switch somewhere in your system. The purpose of the float switch is to float up as the water in the sump pit rises. When this float switch gets to a certain point, the sump pump is turned on. This triggers the water to flow out. As the water flows out, the sump pump float switch will fall back down. This turns the system back off.

Your system is likely to be continually running as the sump pump switch has managed to get stuck in the ‘on’ position. This is something which needs to be rectified otherwise it could burn out your sump pump. If you look down into the pit, it is likely that the float switch will have managed to become latched onto a wire or something. All you need to do is free it and you should be good to go.

Sump Pump Checks Valve

It is very rare that this would be the reason as to why your sump pump has stopped working. The purpose of the sump pump check valve is to collect water. It will then pump it through the discharge line which takes water out of your house. There is a problem when the sump pump system empties the water and then turns off. If this happens, the water is going to fall back down the pipe. The system will turn back on, and the process will continue to repeat itself.
Most sump pumps should have a check valve built into them. The purpose of this check valve is to stop water flowing back into the pump. If the float switch is not stuck, there is a good chance that the check valve may have started to fail. You can replace these easily.

Plumbing Issues

There may not even be an issue with your sump pump. It could be down to a plumbing issue. If you have a sprinkler in your garden that is broken (the sprinkler is located underground), then it may be constantly pumping out water for your sump pump to work with. The same happens if you have a broken pipe. A common issue we have found is that people install permanent garden furniture and damage the pipes without even realizing it. Things like umbrella poles drilled into the ground are the most common cause of outdoor plumbing damage. We recommend you use portable furniture like the offset patio umbrellas at Thanos Home or Home Depot. And it is also a good idea to ask a plumber where exactly the pipes are under your garden.

The only way in which you are going to be able to deal with an issue like this is if you deal with the plumbing problem to begin with. Your best bet is to call in a plumber as they will be able to help you to ensure that there is no damage to pipes and the like. If there is, they will be able to deal with it.


People are drawn to the opportunity of a green living lifestyle which can be beneficial for a variety of reasons. This can sound quite complicated and can help by instilling positive values in the younger generation. Green living spaces can help satisfy you as well as be beneficial for the environment. The amount of time that people spend in their own homes can help create an environmentally sensitive house which is the best ways to practice the green living lifestyle.

Pursue energy start options

Replacing the outdated appliances and electronics can allow you with the cost-saving, green living upgrade which will allow you to have the right lifestyle. The bigger the appliance, the better it will perform where you can easily start by replacing the incandescent light bulbs to help save a few dollars over a lifetime.

Create less waste


There are a few habits which can create waste which includes purchasing durable water bottles can eliminate the need for plastic bottles. You can easily opt for a tote bag which will allow you to run errands and eliminate the need for plastic bags which is generally thrown later. Try to opt for paperless options to help cut back on the amount of waste produced.

Local food

The shorter the distance of food travels, the better as it will allow you to consume less energy. Try to make sure that you keep an eye out for the farmer’s market as this will allow you to enjoy local selections of food which is produced to help ensure that you are enjoying locally grown products without damaging the chemicals into the environments.

Turn off light

Trun off light

A simple task of turning off the light can save a lot of energy as allowing you to live green living movements if you are trying to lead an eco-friendly lifestyle which allows people to conserve energy. You can start by opening the curtains, which allows the sunlight to enter.

Use green products

Everyone needs to consume clean, but when it comes to cleaning products, many supermarket products have a lot of negative effects. You need to make sure that you are giving importance to your health. Soda and vinegar is the best ways to leave your home clean and shiny without any side effects.

Use green products

Embrace cooler water

Try to make sure that you are adjusting the right home water heater which can help by reducing the energy and help with the financial expenses to run the appliances. Drinking cooler water help reduces the risk of scalding and is one of the most eco-friendly ways to opt for cold water rather than hot water.

You need a sump pump if you want to avoid water damage to your property. If your basement or crawl space is prone to flooding and you do not have a sump pump installed, you will be looking at some very costly damage eventually. If you have ever had to ‘treat’ even the mildest of floods, you will know that the stench is foul and even the smallest amount of damage will cost you an arm and a leg. In many cases, you may not even be covered for the damage under your home insurance as you did not have a sump pump installed.

Superior Pump 1/4 HP Thermoplastic Submersible Utility Pump

The plastic construction of the Superior Pump helps to keep costs down. However, don’t worry about this being a sump pump which is just going to break on you. The construction is corrosion resistant which means that it should be able to work for you for many years to come. This is a sump pump which has been designed for domestic use. It is able to pump up to 30 gallons of water a minute at a vertical height of 25 feet. This is an astonishing amount considering it comes in a rather small package.

It is even able to run continually for periods of time although, of course, it is never really recommended that you run your sump pump continually as it can cause issues in the long term.
You can fit this sump pump into a six-inch opening which makes it one of the most compact sump pumps on the market.

Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp

The Zoeller sump pump is a submersible sump pump that is a favorite among many contractors and plumbers. This is due to the amount of efficiency it boasts when it is looking to clear water out of a sump pit. One of the main advantages of this pump is that it is made from cast iron. This means that there should be absolutely no issues in terms of breaking down in the pit. Even the automatic float switch is constructed to a high standard. Basically, this is a sump pump which has really been built to last. Trust us on this one.
The fact that this sump pump has a 9ft power cord means that your sump pit can be a good distance away from your electrical system and you will still be able to use the sump pump. The one-third horsepower construction means that it is going to be pumping out water from your sump pit incredibly efficiently.
The well-constructed nature of this sump pump means that you are able to just install it and leave it in place. If the switch fails, you can get the spare parts to replace it with ease.

WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch

If you are looking for one of the highest-powered sump pumps on the market, then this is what you need. It is able to cope with 4,600 gallons of water per hour. The Wayne CDU 980E is more than enough for most situations. It will be able to cope with 3,500 gallons per hour at 10 feet lift. Basically, unless there is serious flooding in your area, that is going to work. Plus, if you have 3,500 gallons of water flowing in, you probably have serious issues anyway.
Perhaps the real highlight of this sump pump is that it has a quality float switch inside. This float switch has been extensively tested.

In fact, it has been tested up to one million cycles. This means that once you have the sump pump in place, you probably will not need to constantly check the water flow in the pit. You can just expect it to work without any issues.

Flotec FPPM3600D-01/09 1/3 HP Pedestal Sump Pump

This is a very rugged pedestal sump pump. It has a 1/3 HP motor which should be able to cope with most domestic situations. It is able to pump 3480 gallons of water per hour, which should be more than enough. The real highlight of this pump is that it has a non-clogging impeller. You do not really see this at this price range. Most cheap pedestal sump pumps require a lot of effort on the part of the owner to keep working. Not the Flotec. It is very much a case of leaving it in place and it will continue to work for you.

One of the things that we love about the Flotec FPPM3600D is that it has been constructed in the United States. This means that it has been constructed to a very high standard. It is unlikely you will run into any issues with it, but it is nice to know that somebody has your back should you do so.

Liberty Pumps 257 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump with VMF Switch

This cast iron sump pump is powerful. It is able to deal with up to 50 gallons of water per minute. This is incredibly efficient. The cast iron construction does push it into the more expensive side of things, but that is OK in our opinion. Despite being a touch more expensive than other sump pumps on the market, it is able to continue to perform to a high standard for years to come. These things are going to be nigh on indestructible.
The magnetically operated vertical float switch is incredibly robust. If you do ever have an issue with it, it will not be for years down the line. Couple this with the 10 foot power cord and you can ensure that your sump pump can be a good distance from your sump pit.

The job of the sump pump is to prevent flooding. Basically, it helps to keep the building dry. Sump pumps are installed in what are known as sump pits. Water will be directed to the sump pit. There will either be a drain in place or it will be a natural water flow through the soil around the sump pit. As the water in the sump pit starts to fill up, the sump pump will be kicked into action and it will start to push it out.

Welcome to our Brita vs PUR comparison. When it comes to water filters, Brita or PUR are probably two of the biggest names around. Here, we want to do a comparison of these two so you will be able to work out which one is going to be right for you. There will be no winners or losers here, just cold, hard facts.

Size and Design

The Brita water filter deals with 10-cups of water. The PUR water filter 18-cups of water.
Perhaps the key difference between these water filters is how you use them. The Brita water filter is a jug. It only works as a jug. The PUR is a water filter which acts as a water dispenser. This means that you need to use the small nozzle at the front of the device to get your water out. You will not be able to pour the water directly into your glass. This means that in many cases, the Brita may be more convenient. If you want something to put in the fridge, the PUR is probably the best route to go down.

Filter Technology

The filter technology in both the Brita and the PUR are about the same. They will both remove contaminants from the water that you are drinking adequately. The filters in each of the units can cope with 40 gallons of water before you need to replace it. The fact that the PUR is a slightly larger water filter means that you will probably be replacing it a lot more often.
Due to the technology behind each of the devices, the amount of contaminants that are removed does vary. It is only a small amount, but the difference may mean a lot in some cases:

– The PUR filters 97% of Chlorine. The Brita removes 94%.
– The PUR filters out 97% of Lead. The Brita filters out 95% of lead.

This is based on research carried out by the NSF, which means that you can be sure that this is the most accurate information around.
The team at PUR claim that their water filter is able to remove 13 different contaminants from the water, while the Brita is only able to remove 6, or at least that is their claim. However, it is perhaps worth noting that the ‘extra’ contaminants that the PUR removes are unlikely to be found in your standard water supply so you should not really see this as much of benefit.
In terms of replacement filter prices, the two of them should be much the same price. There may be a few savings here and there but there should not be anything too drastic.

Filter Features

The Brita contains a sticker which will allow you to work out when the filter needs to be replaced, the PUR does not contain the same thing. However, it is easy to tell when a filter is close to needing to be replaced. You will be able to notice a change in the taste of the water. It is nothing major, but when you have been drinking water from a filter for a while, you can tell.

Installing solar PV panels on the roof of your home or business is a great way reduce your carbon footprint which also saving yourself money. But one aspect people often don’t consider is the maintenance costs than creep in every year. For large businesses, this may mean having what the industry calls an O&M (Operations & Maintenance) system, which is a set schedule of maintenance. But what about small businesses or home owners? What can they expect, and is there anything that can be done to keep maintenance costs down? Lets take a look.

For a start most solar PV panels have a 25 year warranty, so if they break or fail in some way, you won’t be liable to replace them. There is of course the matter of labour though, and if you are unable to carry out the swapping of panels on your roof, you may need to get an electrician or handyman in.

In terms of actual ongoing maintenance, the first bit of good news is that most of the time they don’t require much maintenance at all. For most people, keep the panels in direct sunlight is the hardest part, as tree branches can cast the panels into shadows. Similarly, the panels are placed in an area which gets a lot of dirt, dust, bird droppings or other debris, a light clean with warm water will often be required. Again, if you’re not comfortable getting on top of your roof, a handyman or a window washer or roofer may be able to help you.

In terms of keeping your maintenance down, make sure your panels are at around 15 degrees, meaning that any rain water will likely wash at least some debris off of your panels.